Kirkby Box (laser-cut tool box)
A simple glued plywood tool box cut on a laser cutter. Single-sheet SVG layout for 3mm plywood.
SVGCDRCC-BY-SA 4.0
By Simon Kirkby (via Obrary) · source · 6 downloads
Templates / Laser · switch to CNC →
◇ Laser templates
Ready-to-cut SVG and DXF templates for laser cutters: boxes, living hinges, joints, signs, puzzles and mechanisms. Check the material thickness each file was drawn for.
12 files in SVG
Stackable Boxes (snap-together)
Plywood boxes that snap together without glue and stack on each other. Single SVG.
SVGCC-BY-SA 4.0
By Simon Kirkby (via Obrary) · source · 7 downloads
XBee Protector Box
Small snap-fit acrylic enclosure to protect an Arduino XBee module; a good minimal electronics-enclosure starting point.
SVGCC-BY-SA 4.0
By Simon Kirkby (via Obrary) · source · 7 downloads
Boxes.py: simple finger-joint boxes
A plain finger-jointed open box and a universal lidded box generated by the Boxes.py generator, provided as ready-to-cut SVGs. Good starter templates; make custom sizes at boxes.hackerspace-bamberg.de.
SVGGPL-3.0-or-later
By Florian Festi (Boxes.py) · source · 6 downloads
Roman Arch Bricks
Fold-up cardboard voussoir bricks; cut nine and students can assemble a self-supporting Roman arch.
SVGPDFCDRCC-BY-SA 4.0
By Zombie Cat (via Obrary) · source · 11 downloads
Basic Puzzle Pieces (word-sounding puzzle)
Simple interlocking letter/word puzzle pieces made to help a young child sound out longer words; single SVG.
SVGCC-BY-NC-SA 4.0
By emily-m (Instructables) · source · 5 downloads
Autolock Joints (interlocking tiles)
Pieces that interlock on all four sides, so a single tile can be copied to build structures bigger than the laser bed.
SVGODGCC-BY-SA 4.0
By Emmanuel Patoux (via Obrary) · source · 6 downloads
Laser Cut Gear train (9mm MDF)
A simple multi-gear train cut from 9mm MDF and glued up; single SVG drawing.
SVGCC-BY-NC-SA 4.0
By SimonD144 (Instructables) · source · 3 downloads
Boxes.py: Dice Tower
Tabletop dice tower with internal ramps and a catching tray that doubles as a lid; generated by Boxes.py.
SVGGPL-3.0-or-later
By Florian Festi (Boxes.py) · source · 3 downloads
Lasercut Puzzle Project (generic jigsaw template)
Classroom tutorial on designing a jigsaw puzzle for laser or CNC, with a generic puzzle-piece template SVG and an example sliced design.
SVGCC-BY-NC-SA 4.0
By jennarichardsart (Instructables) · source · 6 downloads
Handshake Gorilla (Arduino puppet)
Laser-cut gorilla puppet with a servo-driven arm and touch sensor, designed for beginner Arduino workshops.
SVGPDFAICC-BY-SA 4.0
By Jens Dyvik (via Obrary) · source · 9 downloads
Boxes.py: Angled Cut Jig and Drill Stand
A jig for holding stock at an angle inside a laser cutter so edges can be cut at a bevel, plus a stepped drill-bit stand.
SVGGPL-3.0-or-later
By Florian Festi (Boxes.py) · source · 6 downloads