Templates / Laser · switch to CNC →
Ready-to-cut SVG and DXF templates for laser cutters: boxes, living hinges, joints, signs, puzzles and mechanisms. Check the material thickness each file was drawn for.
13 files in DXF
Gift/keepsake box with double walls; the four side walls are one living-hinge piece bent around the corners. Engrave text or designs on the lid.
Open-front parts bins in 4-inch and 6-inch widths that stack for shop, office or craft-room organization.
Edge-lit acrylic sign: files for engraving the acrylic panel plus a laser-cut holder for the LED strip. Swap in your own artwork.
Snap-together clear acrylic tree that displays 28 pairs of earrings.
Manipulative that shows the ambiguous case of the law of sines (two possible triangles for a fixed angle and side).
Laser-cut and engraved folding sundial (the traditional farmer's clock) for finding local solar time.
A sample set of living-hinge (lattice/kerf-bend) patterns, plus the straight pattern at a range of spacings, so you can test which flexes best in your material.
Functional rubber-band-driven model of Galileo's pendulum clock escapement, for teaching gears, stored energy and escapements.
Simple working model of Leonardo da Vinci's cam-driven hammer for students to identify the simple machines inside it.
Wall clock whose hands are driven through a laser-cut planetary gearbox by a stepper motor and Arduino. DXFs for sun, planet and ring gears, carrier, hands and plates.
Slot-together 3D dinosaur skeleton model in 29 pieces, supplied as per-piece DXF files.
Test plate that engraves a grid of speed/power combinations so you can see how settings affect engraving in a given material.
Open-top organizer that holds CNC cutters upright so you can see and pick them, with a side compartment for misc tools.