Files for routers, mills and plasma tables: furniture, jigs, carvings, machine parts.
Pocketed wooden organiser tray for game pieces and reference cards, cut on a CNC router; single DXF.
Material: hardwood board
Non-commercial license.
Small pocketed wooden snack tray milled in an afternoon with an 8mm end mill and a 90-degree V-bit.
Material: hardwood blank about 150 x 210 x 28mm
Depths: 20mm main pocket, 28mm part profile.
Hexagon honeycomb pattern DXF sized for a 1/8 inch end mill, used to pocket a 12 x 10 x 1/2 inch resin and wood serving board.
Material: epoxy resin board 12 x 10 x 1/2 inch, 1/8 inch end mill
Non-commercial license.
Curved-handle cutting board outline for a small desktop CNC, two halves nested for a 7.25 x 24 inch maple board; profile SVG plus an engrave variant.
Material: 3/4 inch maple, 7.25 x 24 inch
Non-commercial license.
Beginner slot-together birdhouse drawn for a ShopBot with T-joints; two designs (a 5-piece minimal house and a larger one) plus an assembly diagram.
Material: 11mm MDF; adjust joints for other thickness
Magnet-and-coil driven wooden pendulum gear clock with all wood parts CNC-cut; DXFs for the base and for 1/4, 1/2 and 3/4 inch stock parts.
Material: 1/4 inch Baltic birch for wheels; hardwood for frame
Non-commercial license.
Sturdy rolling plywood worktable with 3D-printed PETG ankle braces at the legs; DXF, SVG, STEP and STL included.
Material: plywood, 1/4 inch bolts
Non-commercial license.
Single-sheet slot-together plywood bar stool; one DXF cuts the whole stool.
Material: 18mm plywood, 4x3 ft, 1/4 inch end mill
Non-commercial license.
Space-saving flip-top plywood workbench with a Shapeoko XXL bolted underneath; nested 4x8 DXF sheets plus spacer DXFs and the Fusion 360 model.
Material: six 48x96 inch 1/2 inch plywood sheets, 1.5 inch steel tube
Non-commercial license.
A 400 x 1200 x 1118mm slot-together bookshelf cut from two 12mm plywood sheets.
Material: 12mm plywood, 2 sheets
The same mirror holds more Opendesk CC-BY packs (Hot Desk, Unit Table, Lift Standing Desk, Lockers).
Opendesk's flagship Lean Desk: a 1600 x 738mm slot-together plywood desk cut from four 18mm sheets, assembled with M6 bolts and dowels.
Material: 18mm plywood, 4 sheets of 2400x1200
Opendesk's mobile pedestal drawer unit cut from a single 12mm plywood sheet, slot-together with castors. Full cutting sheet plus a test-cut sheet.
Material: 12mm plywood
A screw-assembled plywood chair cut from one 18mm sheet; 410 x 507 x 755mm.
Material: 18mm plywood, 24 screws 4.5x30mm
Standing one-person booth / privacy nook cut from two 18mm plywood sheets and assembled with dowels and M6 bolts.
Material: 18mm plywood, 2 sheets
Parametric stackable wardrobe module designed in OpenSCAD; DXF batch sheets for CNC milling the solid planks and plywood slabs.
Material: solid wood planks plus plywood slabs; see plank_info.txt
Step stool / extra seat designed to cut from one 4x4 ft sheet of 1/2 inch plywood with a 1/4 inch end mill; DXF per part plus nested SVG sheets.
Material: 1/2 inch plywood, one 4x4 ft sheet
Non-commercial license.
One block from the WikiHouse Skylark modular plywood building system: layered DXF cut sheets for an 18mm wall block with dog-boned pockets and a production CSV. The full repo has about 520 DXFs for walls, floors, roofs and openings.
Material: 18mm spruce plywood, 2440x1220 sheets
Full-sheet CNC only.
Corner-finding XYZ touch plate body (print it, or mill it from the STEP) wrapped in conductive tape; works with Universal Gcode Sender's probing module.
Material: PLA plus metallic tape, M5 screw
MDF wasteboard for a 3018-class desktop router with SVG layers for blind-nut recesses, hold-down holes and guide lines, plus printable clamps and slot-nut holders.
Material: 12mm MDF 300x180mm, M4 blind nuts
Low-profile T-slot hold-down clamp set for Openbuilds, MPCNC, Shapeoko and X-Carve style tables; DXFs for milling and STLs for printing. M8 or 5/16 inch T-bolts.
Material: plywood, HDPE or aluminum via DXF; PLA/PETG via STL
Non-commercial license.
Shop-vac powered vacuum hold-down table split into quadrants, for holding thin foam and cardboard; DXFs for top, bottom and hose bracket plus the Fusion 360 file.
Material: plywood plus foam board, dimensional lumber frame
Non-commercial license.
Official Maslow CNC 3/4 inch plywood sled cut file (plain SVG and a toolpathed version) and the 6-inch square test shape used for calibration, as SVG and G-code for a 1/4 inch bit.
Material: 3/4 inch plywood
The classic oomlout desktop 3-axis CNC build (10 x 14 x 4 inch envelope); nested DXF of all the 1/2 inch MDF frame parts for cutting on a CNC or laser.
Material: 1/2 inch MDF, 48 x 48 inch sheet
Three-foot swirl wall sculpture in four independently hung brass pieces, cut on a CNC plasma table; DXF plus the original vector art.
Material: brass sheet; also suits steel or aluminum
Non-commercial license.
Layered plasma-cut steel wall art inspired by Jurassic Coast fossils with resin-filled, LED-backlit cutouts; five DXF sheets.
Material: 1/4 inch plate steel plus 14 to 22 gauge stainless or copper sheet
Non-commercial license.
Ultralight (20g) large-surface-area snow anchor and tent stake profile for plasma cutting from 24 gauge aluminum; a simple first plasma job.
Material: 24 gauge aluminum sheet
Non-commercial license.
Cribbage board hole and track template in groups of five with skunk line, as a Carbide Create project and an SVG for any CAM; sized for a 4.5 x 12.5 inch board.
Material: hardwood 4.5 x 12.5 inch, epoxy fill
Non-commercial license.